Where Can I Buy A Kegerator

Click Here ===== https://ssurll.com/2tIccx

We partner with top manufacturers such as EdgeStar, Avanti, Haier, and Danby to provide our customers the longest lasting, highest rated kegerators. We guarantee we'll match you with the right kegerator or conversion kit for your application at the best price.

When your beer gets stored in cans or bottles, drinking it produces more trash and just winds up in a landfill, or the ocean. Not to mention, all of those cans and bottles take resources to create. A keg is reusable, as are the glasses you pour your beer into. When you have your own kegerator, your beer drinking will come with less waste.

They can sit right on your countertop or be taken with you on-the-go, as well as be stored out of sight when not in use. A mini kegerator gives you the draft beer experience you seek, without taking up much space or costing you a lot of money.

Mini kegerators usually fall in the price range of $150-$350, so they can be a good starting point for someone interested in owning their own dispenser, but not quite ready to shell out the cash for a full size kegerator. Most of these smaller dispensers are made to work with pressurized kegs, but you can find some that will also work with non-pressurized kegs.

In order to have access to a wide selection of beers, you will need a dispenser that is capable of fitting at least a sixth or quarter barrel keg. Most kegerators will be able to easily fit this size keg, with many units able to fit two or three, allowing you to keep multiple beers on tap at all times.

This is going to be the most common unit available. You can pretty much keep them anywhere inside your house where you can fit them. They often come with casters attached at the bottom, allowing you to easily roll them from one spot to another. It is, however, recommended that you allow at least 2-3 inches between the back of the device and the wall for proper ventilation.

A freestanding kegerator is going to be a bit more expensive than the mini version, but also more affordable than outdoor and built-in units. The price is going to vary due to many features, but generally fall somewhere in the $350-$900 price range. But overall, this is likely going to be the best kegerator for the majority of people.

It is important to mention that you should not install a freestanding kegerator into your countertops. It needs to be properly ventilated, otherwise, you will likely just shorten its lifespan.

Perhaps you want to keep a kegerator out in your garage or on your back patio, if this is the situation you find yourself in, then we would strongly recommend you buy a kegerator that is specifically engineered to withstand the ever-changing elements of the environment they will reside within.

Many of these units are designed to be more than just a kegerator. They all generally have space for the kegs below, but also are engineered to have extra refrigeration space for bottles, cans and other items a bartender may need during the course of their shift.

To work effectively, your kegerator needs to hold pressure well and keep the interior at a consistent temperature. For your beer to stay fresh for as long as possible, you will want your kegerator to keep the temperature inside at 38°F, give or take. Keep in mind, the storage or serving temperature may vary depending on the type of beer within.

Think about how many beers you may want to keep on tap. Home kegerators are available with a multitude of tap configurations. While they are available with three taps, the dual-tap option is the most popular choice among consumers.

Most people will want to go with a freestanding kegerator for their home, as they are easier to move around or take with them if they move. However, this type of dispenser does require a couple of inches between the back of the unit and the wall. This tiny sliver of space is necessary for the unit to operate properly. Without the proper ventilation, your kegerator will have a hard time keeping the interior temperature consistent. This will cause it to work harder than it should and, ultimately, shorten its lifespan.

If the only place you have room for your kegerator is in the garage or the backyard, then an outdoor model is strongly recommended. As the seasons roll by, you will want a unit that can withstand the constant change of temperatures without overworking itself. Depending on the climate in which you reside and how extreme the temperatures get, you may be able to use an indoor unit out in the extreme elements. But, we would advise against it.

You should also make a careful point of cleaning your kegerator on a regular basis. From your beer lines to individual components, any part of your kegerator that comes in contact with your beer needs to be cleaned often. Cleanliness is not only an important issue to properly maintaining your kegerator, but it also ensures that your beer tastes the way it should.

As you browse your options, be sure to keep an eye on the temperature range each model has listed within the product specs. The best temperature to serve beer is largely dependent on the type of beer and your personal preferences, but in a general sense, you will want a kegerator that can keep a steady 38°F to 40°F. You should have no problem finding a kegerator designed to meet those temperatures.

Many kegerators come with digital displays that give you an easy way to check the current temperature inside the unit. Alongside these displays, you will typically find an easy way to adjust the temperature to better accommodate your preferred taste. You do want to keep an eye on that temperature so that if a problem does arise, you can troubleshoot and resolve quickly.

Since kegerators are a form of refrigerator, they typically make noise like refrigerators sometimes tend to do. And some will be louder than others. If you plan on keeping your kegerator in a space where you spend a lot of time, then you may want to search for one with a reputation of being on the quiet side.

Avanti makes a portable kegerator that fits two mini kegs. Reviewers like that it will fit any type of 5L keg, whether commercially produced or homebrew, and that the ability to fit two kegs means you always have a backup when one runs out. They also say installation is easy and the keg looks great. The critical reviews seemed to be mainly about the pour flow being slow, the unit being a little loud or having problems finding their favorite beers in the 5L keg. However, the majority of the reviews were positive, with customers being happy with their purchase.

Perhaps the true leader for home kegerators, EdgeStar is one manufacturer that continues to receive positive feedback, has a strong reputation and offers a large lineup of kegerators. This is where you should start your search.

True has a line of direct-draw dispensers that are primarily meant for commercial use. The majority of reviews are stellar with customers saying that they work great, are dependable and extremely well-made. The main complaints came from those that bought a True kegerator for home use and were disappointed that the warranty only covers commercial use, so be careful going with this brand if you plan to keep the kegerator in your home.

do all brand kegerators return to their settings that you have applied. after a power failure or blackout. My last unit after a blackout and you were away for some time would result in the kegs going warm and also making a mess on the floor. Could you please advise on the right brand..Thank you.

A kegerator is a refrigerator designed to store and dispense kegs of beer or other beverages. It is typically equipped with beer (or beverage) and air lines, an air (CO2 or Nitrogen beer gas) tank, a regulator, a draft beer tower, and a faucet. The beer keg is kept at a consistent temperature and carbonation level, allowing for a perfect pour every time. They can be used for either home or commercial use.

The keg connects to the kegerator via a coupler (#11). An air line (#7) attached to the coupler pushes gas from the air tank (#8) into the keg, which draws beer from it. The beer travels out of the keg through the coupler into beer lines (#10), which travels up into a draft tower (#3) and connects to the faucet (#2), where the beer is dispensed.

Residential kegerators are typically designed to hold a half keg or 2 to 3 corny or sixtel kegs at a time, depending on the size of the refrigeration unit. Commercial kegerators vary widely in size and capacity but typically hold 1-5 half kegs and up to 12 corny or sixtels. Learn more about beer keg sizes and dimensions with our guide.

One of the long-term benefits of owning a kegerator is the money you will eventually save. Buying a keg of beer is like buying just about any other item bulk, the cost per ounce or pint is less with a keg than buying a 6 or 12-pack. Ultimately, you end up paying for the kegerator with the money you saved from not buying packaged beer. We even saved you the trouble and did the math for you to show how a kegerator pays for itself.

The best part of owning a kegerator is being able to experience the joy of drinking a freshly poured pint of draft beer at home. No more driving to the bar down the street or paying for a cab or ride share to the local brewpub. Just you and your friends hanging out around your kegerator, having a good time.

These are the most affordable and typical style of kegerator available. Freestanding kegerators are perfect for pouring beers in your basement, rec room, den, garage, and indoors. Most units come with casters on the bottom so they can be moved easily.

The one thing to remember with freestanding units is to leave enough room for proper ventilation. Warm air from the compressor is vented from the back of the unit. You want to leave an opening of 2 to 3 inches behind the kegerator so the air can escape. A kegerator that does not have proper ventilation will not last very long. These types of units should not be installed for countertop use.

Serving draft beer on your backyard patio or pool deck requires a kegerator designed to withstand the elements. Outdoor kegerators have a rugged, stainless steel exterior to prevent rusting and a sealed back to protect the electrical components inside. 781b155fdc